Online CERAMICSPEED OSPW System | SRAM Red/Force AXS | blue

CERAMICSPEED OSPW rear derailleur cage system | SRAM Red/Force AXS | blue

The Oversized Pulley Wheel System from CERAMICSPEED is the logical consequence of minimizing friction. The large derailleur pulleys with 13 teeth at the top and 19 teeth at the bottom significantly minimize the movement of the chain links when passing through the cage, which is reflected in less friction. In addition, the larger rear derailleur rollers offer a longer service life than other commercially available systems.

Technically, the OSPW system is equipped with high-performance bearings and special ceramic balls made of third-grade silicon nitrite (best grade achieved for ceramic bearings). The ball bearing cage is made of reinforced polyamide, with a hardened steel race and polished groove. The CERAMICSPEED bearing balls are 15% harder, 100% more flexible and 99% more resilient than standard ceramic balls. CERAMICSPEED bearings are considered to be the best ceramic bearings worldwide.

The bearing cage is made of carbon fibers that have been reinforced with polyamide so that the forces can be better distributed and absorbed and your rear derailleur works perfectly even in the most adverse conditions.

CeramicSpeed only uses the best materials and the latest technologies in production in order to always achieve the highest possible quality. All products are handmade in Denmark. No hydraulic presses are used during assembly. Manual assembly eliminates manufacturing tolerances and always guarantees a 100% fit. So that you really only use the best on your bike!

Maintenance: It is important to properly lubricate the bearings to maintain performance and longevity. Simply apply oil to the bearing seals so that the oil can penetrate the bearing. Do this whenever you lubricate the chain, or after washing the bike and riding in wet conditions.

IMPORTANT: When travelling, please remember to dismantle the entire rear derailleur with an Allen key, as very few bicycle transport bags offer enough space for the OSPW system.

Note: Mounting the OSPW system on SRAM rear derailleurs with Orbit Clutch is a little more difficult than on conventional rear derailleurs. If you have any doubts about the assembly, we recommend that you have it carried out by an experienced mechanic.

The cage does not fit Rival AXS, Red XPLR, Force XPLR or Rival XPLR AXS rear derailleurs.Technical specifications:

Area of intended use : Road
Material cage: carbon, polyamide
Material bearing: polyamide, steel, ceramic
Material wheels: aluminum
Number of teeth on top: 15
Number of teeth below: 19
Compatibility rear derailleur: SRAM Red / Force AXS, SRAM Red eTap 11-speed from 2020 with Orbit Clutch
Compatibility chain: 11-speed , 12-speed
Largest sprocket: 36 teeth ( 12-speed ), 32 teeth ( 11-speed )
Colour: blue, carbon

Weight according to manufacturer: –
Weight weighed: 75g Scope of delivery:

1x CERAMICSPEED OSPW derailleur cage system | SRAM Red/Force AXS | blue
1x 15ml oil
1x Bearing Cage Removal Tool

EAN:
5711050100071

MPN:
110569