Featured CERAMICSPEED OSPW X System Coated | SRAM Eagle mechanical

CERAMICSPEED OSPW X Derailleur Cage System Coated | SRAM Eagle mechanical

The fastest pulley system is now also available for your bike with mechanical SRAM Eagle rear derailleur.

The Oversized Pulley Wheel System X (OSPW X) from CeramicSpeed is the logical consequence of minimizing friction. Due to the large derailleur rollers with 14 teeth at the top and 18 teeth at the bottom, the looping radii of the chain are significantly minimized, which is noticeable in less friction. In addition, the larger derailleur rollers offer a longer service life than other systems available on the market. Thanks to the narrow-wide profile of the teeth, your chain stays exactly where it belongs in every situation.

Technically, the OSPW X system is equipped with high-performance bearings and a special ceramic ball made of third degree silicon nitrite (the best degree achieved for ceramic bearings). The ball bearing cage is made of reinforced polyamide, with a hardened steel race and a polished groove. The CeramicSpeed bearing balls are 15% harder, 100% more flexible and 99% more resilient than commercially available ceramic balls. CeramicSpeed bearings are considered the best ceramic bearings in the world.
The bearing cage consists of carbon fibers, which have been reinforced with polyamide, so that the forces can be better distributed and absorbed and your rear derailleur works perfectly even in the most adverse conditions.

Coated version
Compared to the already high-quality standard bearings from CeramicSpeed, the “coated” version has a very thin protective layer applied to the bearing rings. The latter become even harder, have a 60% longer life cycle and even lower rolling resistance.

maintenance
It is important to carefully lubricate bearings to maintain performance and longevity. Simply apply oil to the seals of the bearings so that the oil can enter the bearing. Do this every time you lubricate the chain, after washing the bike, or after riding in wet and muddy conditions.

IMPORTANT
When traveling, please remember to dismantle the entire rear derailleur, as very few bicycle transport bags offer enough space for the OSPW system. This derailleur cage is not suitable for electronic SRAM Eagle AXS derailleurs.Technical specifications:

intended use : MTB
Material cage: carbon, polyamide
Material bearing: polyamide, coated steel, ceramic
Material rollers: aluminum
Number of teeth above: 14, narrow-wide
Number of teeth below: 18, narrow-wide
Compatibility rear derailleur: SRAM Eagle XX1, Eagle X01, Eagle GX, Eagle NX
Compatibility chain: 12-speed
largest pinion: max. 52 teeth
Color cage: black
Color pulley wheels: black or gold

Weight according to the manufacturer: n / a
Weight weighed by yourself:Scope of delivery:

1x CERAMICSPEED OSPW X derailleur cage System Coated SRAM Eagle mechanical
1x 15 ml oil
1x sticker sheet